Key Features of the R-IN32M3 Series

2012-12-16 11:10:01

Week News Abstract For Fiber Series in 10GTEK
The abstract is mainly about the optical communication related products,including: SFP,QSFP,FTTH,GPON,EPON,SFPPLC,PTN,ODN,Sfp Transceiver,Optic Transceiver,Optical module,Optical devices,optical communications,Optical transceiver module,Etc.

Mitel’s StreamLine
Mitel announced Streamline, which is a unique product, but Phybridge is the OEM. The data sheet of Mitel’s StreamLine markets it as an Ethernet LAN switch that uses legacy wiring to deliver IP telephony.StreamLine is said to be readily “plug compatible” with existing voice-grade cabling infrastructures. It is likened to an IP router serving as a switch between the LAN and the IP phones. With Mitel’s setup, however, each IP phone requires a StreamLine adapter at every endpoint to deliver power and to configure voice-grade cable’s two-wire system to Ethernet signaling.This StreamLine and Mitel’s previously announced UC360 Collaboration Point (a Mitel multimedia conferencing appliance) are not specifically designed or optimized for Mitel-specific implementations. It is possible that Mitel intends to make these products available for general distribution instead of exclusively through its own dealers.
Voice-Grade Cable Solutions: Not Going Away Soon
Data-grade cabling is the future of enterprise communications but traditional Cat 3 does not seem to be going away as many had expected. These technologies make excellent use of sunk infrastructure, and many are now considering wireless a better option than rewiring with Cat-5/6. Adtran and Mitel have wireless options, too. Adtran has its NetVanta access points and BlueSocket cloud managed wireless service and Mitel has its wireless gateway.Thanks to these options, 20th century cable can be useful in the 21st century. All three vendors sell through channel partners. (KOM)
Key Features of the R-IN32M3 Series
(1) Integrated real-time OS offload engine (HW-RTOS) and Ethernet accelerator Industrial Ethernet communication applications require support for a large number of tasks, high-speed time synchronization, and low power consumption. By implementing real-time OS processing in hardware, which previously imposed a substantial load on the CPU, and standard Ethernet communication protocol processing such as checksum calculation and header sorting, processing speed is increased five to ten times. The HW-RTOS driver is µITRON compliant. Plans call for support for additional OSs to be added in future. (2) Multi-protocol support (CC-Link IE, EtherCAT, EtherNet/IP, etc.) The R-IN32M3-CL with CC-Link IE support integrates a slave controller supporting CC-Link IE Field as a circuit. CC-Link is a 1 Gbps industrial Ethernet communication standard that is the industry's fastest and is promoted by the CC-Link Partner Association, a Japanese organization promoting open networks. The R-IN32M3-EC with EtherCAT support, on the other hand, integrates a slave controller supporting the EtherCAT industrial Ethernet communication standard. Both feature an ARM Cortex-M3 (100 MHz) 32-bit RISC CPU, a media access control (MAC) with low-latency 2-port switch function required by industrial Ethernet protocols, and large on-chip memory. Support by protocol software for EtherNet/IP, FL-net and some others are under final preparation. In addition to communication interfaces with industrial Ethernet support, communication interfaces such as CC-Link, CAN, serial peripheral interface (SPI), and UART can be implemented as well, allowing R-IN32M3 series products to be used as gateway modules to an industrial Ethernet network. (3) R-IN32M3-CL with 1 Gbps MAC and R-IN32M3-EC with 10/100Mbps EtherPHY. The R-IN32M3-CL, which implements the CC-Link IE protocol in hardware, incorporates a 1 Gbps Ethernet MAC, so 1 Gbps Ethernet communication can be achieved by adding an external 1 Gbps EtherPHY. The R-IN32M3-EC, in contrast, integrates a 2-port 10/100Mbps EtherPHY, so no external PHY is required, which contributes to making a smaller module board. Note that the hardware purchase cost is roughly identical whether an external or an internal PHY is used. Samples of the first products in R-IN32M3 series, the R-IN32M3-CL and R-IN32M3-EC, will be available in January 2013, priced at US$25 per unit. Mass production of the R-IN32M3 series is scheduled to begin in June 2013 and is expected to reach a scale of 300,000 units per month in April 2015.
The above information is edited by 10GTEK.
10GTEK TRANSCEIVERS CO., LTD (Hereinafter refered to as 10GTEK) is specialized in developing and manufacturing Fiber Optical Transceivers and High Performance Cables which are wildly applied in Datacom, Telecom and CATV, providing customers with top quality and cost effective products. Our High Speed Cables cover Passive SFP+ Cable, Active SFP+ Cable, QSFP+ cables, MiniSAS (SFF-8088) Cables, CX4 Cables, Harness cables, Breakout Cables, Patchcords. We also manufacture Fiber Optic Transceivers like 10G XFP, 10G SFP+, SFP DWDM/ CWDM, GBIC, etc. The prompt response and excellent customer support contribute to clients‘ full satisfaction.Today, 10GTEK has been growing fast in the optical field for its unique and competitve excellence which has got a high attention from datacom and telecom.
?This article reader also like:Phybridge’s UniPhyer