Immersion Cooling System
10Gtek's QSFP+Extender is used for long-distance transmission of QSFP+. The QSFP+Port could be transferred/converted into 4x SFP+port by Direct Attach Copper (DAC) technology under very lower insert lose. 10Gtek's QSFP+Extender are provided in 1U rack and movable version with 3.3V power supply. Transmission distance could be extended longer by connecting with Stable SFP+Transceivers.
100G Solution for Liquid Immersion Cooling System Liquid cooling has been an accepted method of conditioning electronics for more than half a century. Immersion Cooling is at the foundation of Immersed Computing. It means the complete immersion of electronic components in a dielectric liquid. By doing so, all the heat generated by the IT is captured in the liquid. Suitable dielecric liquids can absorb approximately 1500 times more heat energy than air with the same volumes and temperatures.
SFP+ transceiver is a standardized form factor for fiber optic and is used in datacom and telecom optical links, offering a smaller footprint and lower power consumption than XFP transceivers. Initial standard applications focused on 8G & 10G Fiber Channel, 10G Ethernet, SONET OC-192, SDH STM-64.
200/400Gb/s QSFP-DD DAC
DAC(Direct Attach Cable)
DACs are widely chosen by data centers for connecting servers to the Top Of the Rack(TOR) switch as they are passive, consume zero power, have the lowest latency and cost-effective. DAC is the ideal option for data centers, super computers and other circumstances similar. 10Gtek offers a wide range of products for 0.5m to 10m lengths and in QSFP+, SFP+, XFP, CX4 form factors.
100G QSFP28 DAC
10Gtek’s QSFP28 passive copper cable assemblies feature eight differential copper pairs, providing four data transmission channels at speeds up to 28 Gbps per lane, and meet 100G Ethernet and Infiniband Enhanced Data Rate (EDR) requirements. Offered in a broad range of wire gages (from 30AWG through 26AWG), this 100G copper cable assembly features low insertion loss and low cross talk. QSFP28 form factors can be used with current 40G and 100G applications with substantial signal integrity margin.
100G QSFP28 AOC
10Gtek’s active optical cable assemblies use state-of-the-art technology to provide cost effective high data throughput interconnects. The cables incorporate E/O and O/E conversion built into the connector shell to yield a dramatic improvement in PCB real estate utilization. Using 850 nm VCSEL technology, the active cable assemblies will operate over a data rate of 25 Gb/s per lane with an aggregate data rate of 100 Gb/s in each direction.
AOC(Active Optical Cable)
10Gtek's SFP+ Active Optical Cables are hot-swappable, low-voltage cable assemblies that connect directly into SFP+ modules at both ends. These cables use a 20-position connector with active circuitry to increase distances and to improve EMI and reduce signal loss. 10Gtek's SFP+ Active Optical cable transmits 10Gbps data in each direction over a loose tube fiber with distance up to 100m.
SFP/QSFP Loopback System
SFP/QSFP Loopback System
100G QSFP28 Transceiver
The 10Gtek 100G QSFP28 transceiver is a 100Gb/s Small Form-factor Pluggable (QSFP28) optical module. The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 25Gb/s operation for an aggregate data rate of 100Gb/s.
Data Center Solutions
Recent data centers trends Data center power consumption continues to draw a lot of attention. According to a recent IDC report, power accounts for 40% of the operating expenses of a data center and the cost of this power has doubled in the last five years. By 2012, IDC estimates data center power costs will equal server capital cost. Additionally, the contribution of data centers as a fraction of total energy consumed is growing as well. As per the 2007 EPA report on data center efficiency, data centers contributed to 1.5% of all the power consumed in the US, with the number expected to double by 2011. These trends are driving the emphasis towards data center power efficiency.
Mux/Demux & OADM
10Gtek's HDMI product family contains the transceiver, AOC, converter, extender with standards of HDMI from 1.4 to 2.0. According to the required distance of practical application, 10Gtek's HDMI related products can be divided into four categories which are short range (0-100 meters), medium range (10-100 meters), and long-range (over 100 meters).
HDMI to Fiber
HOMT-002, is a HDMI transceiver for HDMI signal serial data stream transmission. HOMR-002, is a HDMI transceiver for HDMI signal serial data receiver. HDMI optical transceiver support an uncompressed lossless HDMI 1.4a signal transmission over multimode optical fiber at 850nm, up to distances of 300 meters @ OM3.