40/100G QSFP Breakout AOC

 

10Gtek® QSFP+ to 8LC Active Optical Cable (AOC) QDR is a high data rate parallel cable, which is designed to overcome the bandwidth limitation of traditional copper cable. It offers 4 independent data transmission channels and 4 data receiving channels via the multimode ribbon fibers, each channel is able to achieve the rate of 10Gb/s.

The 10Gtek® QSFP+ to four SFP+ 40Gbps fanout Active Optical Cable is an adaptor cable which provides connectivity between device using QSFP+ port on one end and SFP+ ports on the other end. The integrated cable transmits 4x10Gbps data on the QSFP+ side and 1x10Gbps data on the SFP+ side in duplex over a loose tube fiber with distance up to 100m. The fanout AOC is SFF-8431 (SFP+ side) and SFF-8436 (QSFP+ side) compliance.

The 10Gtek® AOC-Q44S-xxx is a VCSEL-based, cost-effective 100GbE to 4x25GbE active optical splitter cable (AOC) designed for use in 100GbE Ethernet systems.The AOC-Q44S-xxx is compliant with SFF-8402 for the SFP28 ends and with SFF-8665 for the QSFP28 end. It provides connectivity between system units with a QSFP28 port on one side and up to four different SFP28 ports on the other side, such as a switch and four servers. The cable connects data signals from each of the 4 MMF (Multi Mode Fiber) pairs on the QSFP28 end to the single pair of each on the SFP28 ends. Each QSFP and SFP port comprises an EEPROM providing product and status monitoring information which can be read by the host system.

 

 

Standard Compliance

Electrical: IBTA V2 Revision 1.2.1 and 1.3

IEEE 802.3ba

SFF-8436

SFF-8431

SFF-8432

SFF-8472

SFF-8402

SFF-8665/SFF-8636

 

40G QSFP+ to 8x LC AOC

   
  • InfiniBand 4X SDR, DDR, QDR and FDR
  • Ethernet 10G, 40G
  • FiberChannel 10G, 40G, SAN
  • Rack-to-Rack, Shelf-to-Shelf Interconnect Top of Rack (TOR) Switch
  • Networking, Storage
  • Hubs, switches, routers, servers Supercomputer, HPC
P/N Data Rate
(bps)
Description L(m) Cable Type Power BER
AOC-Q1C2-010 40 G QSFP+ to LC Connetor Optical Cable 10 MMF OM3 <1.05W <10^(-15)
AOC-Q1C2-015 40 G QSFP+ to LC Connetor Optical Cable 15 MMF OM3 <1.05W <10^(-15)
AOC-Q1C2-020 40 G QSFP+ to LC Connetor Optical Cable 20 MMF OM3 <1.05W <10^(-15)
AOC-Q1C2-030 40 G QSFP+ to LC Connetor Optical Cable 30 MMF OM3 <1.05W <10^(-15)
AOC-Q1C2-050 40 G QSFP+ to LC Connetor Optical Cable 50 MMF OM3 <1.05W <10^(-15)
AOC-Q1C2-100 40 G QSFP+ to LC Connetor Optical Cable 100 MMF OM3 <1.05W <10^(-15)

40G QSFP+ to 4x SFP+ AOC

    
  • InfiniBand 4X SDR, DDR, QDR and FDR
  • Ethernet 10G, 40G
  • FiberChannel 10G, 40G, SAN
  • Rack-to-Rack, Shelf-to-Shelf Interconnect Top of Rack (TOR) Switch
  • Networking, Storage
  • Hubs, switches, routers, servers Supercomputer, HPC
P/N Data Rate
(bps)
Description L(m) Cable Type Power BER
AOC-Q14S-005 40 G QSFP+ to 4x SFP+ AOC Breakout Cable 5 MMF OM3 SFP+: <0.35W QSFP+: <1.05W <10^(-15)
AOC-Q14S-010 40 G QSFP+ to 4x SFP+ AOC Breakout Cable 10 MMF OM3 SFP+: <0.35W QSFP+: <1.05W <10^(-15)

100G QSFP+to 4x SFP28 AOC

  
  • Programmable Tx Input EQ and Rx Output Amplitude and Pre-Emphasis
  • Single 3.3V Power with Low Power of 2.5W (QSFP28) and 0.8W (SFP28)
  • Support up to 70/100m via OM3/OM4
  • Bit Error Ratio (BER): 10E-12
  • Ethernet for 100GBASE-SR4
  • Infiniband EDR, FDR, QDR
  • HPC Interconnects


QSFP28 End

  • Bit rate support from 25Gbps to 28Gbps
  • Low power consumption: <0.8W
  • SFP+ housing with enhanced EMI shielding
  • Support up to 70m by active optical cable with OM3 fiber
  • Applicable to 25G Ethernet
  • High capacity IO with SFP+ interface
  • Data Center and in-rack connection
P/N Data Rate
(bps)
Description L(m) Cable Type Power BER
AOC-Q44S-005 100 G QSFP28 to 4x 25G SFP28 AOC Breakout Cable 5 MMF SFP28: <0.8W QSFP28: <2.5W <10^(-12)
AOC-Q44S-007 100 G QSFP28 to 4x 25G SFP28 AOC Breakout Cable 7 MMF SFP28: <0.8W QSFP28: <2.5W <10^(-12)
AOC-Q44S-010 100 G QSFP28 to 4x 25G SFP28 AOC Breakout Cable 10 MMF SFP28: <0.8W QSFP28: <2.5W <10^(-12)
AOC-Q44S-015 100 G QSFP28 to 4x 25G SFP28 AOC Breakout Cable 15 MMF SFP28: <0.8W QSFP28: <2.5W <10^(-12)
AOC-Q44S-020 100 G QSFP28 to 4x 25G SFP28 AOC Breakout Cable 20 MMF SFP28: <0.8W QSFP28: <2.5W <10^(-12)