Network boffins say Terabit Ethernet is TOO FAST

Date:
2012-11-28 16:32:30
   Author:
10Gtek
  
Tag:

The IEEE consensus group in charge of developing future networking standards has some words for anyone who was hoping to see Terabit Ethernet in the next few years: not so fast.
In July, the IEEE Ethernet Bandwidth Assessment ad hoc group issued a report stating that global demand for network bandwidth is growing at such an alarming rate that terabit-speed networks will be the only way to support capacity, should current trends continue through 2015.
But according to participants in the IEEE Industry Connections Higher Speed Ethernet Consensus group meeting in Geneva, Switzerland this week, such blazing-fast speeds might be just a little too impractical given today's technology, making 400 gigabits per second a much more likely target for the next generation of the Ethernet standard.
Don't expect to see a 400Gb Ethernet port on your laptop any time soon, though – or even a port running the current maximum of 100Gb/sec, for that matter. Such speeds simply aren't necessary for individual PCs, or even most servers.
Large-scale data centers that move lots of packets across network backbones are seeing their links become steadily more congested, however, meaning higher speeds will soon become necessary if overall network traffic growth is to continue.
Forget about RJ-45 cables, too. The only practical way to achieve such stratospheric bandwidth rates is through optical links – and therein lies the problem, because today's top-speed networks are already pushing the envelope of how fast we can push data through fiber optic cable.
According to a presentation given at the IEEE meeting by Kai Cui and Peter Stassar of Huawei, the current 100Gb Ethernet technology has yet to reach a broad market, largely owing to its high cost. Terabit Ethernet would be even more expensive; therefore, to justify its existence it would have to deliver a significantly lower cost per bit than 100Gb Ethernet.
One way to achieve that would be to reuse the building blocks of the existing 100Gb Ethernet standard as the basis for Terabit Ethernet. But Cui and Stassar say doing so "would imply impractically big packages and large amount of interface signals" – that is, it wouldn't work.
The other way would be to develop new light-modulation technology that could transmit data more efficiently. But although several such ideas are in the works, they're still too immature for commercial applications.
"The technology needed to implement advanced modulation formats is currently very far from technical and economic feasibility," Cui and Stassar conclude. "This would suggest that on the short term 1Tb/s would be a too high rate from an engineering perspective and it is unlikely to justify the major R&D cost needed to develop the required technology platform."
On the other hand, 400Gb Ethernet might just be feasible. According to a second presentation developed by a broad cross-section of IEEE Ethernet consensus group members, 400Gb/second is just about as fast as you can go with the current 100Gb Ethernet technology before you get diminishing returns, and there are several technical solutions that could be used to reach that level.
So that's it, then. Following the presentations, IEEE committee chair John D'Ambrosia took a straw poll to see who was in favor of which plan. Of the 62 attendees, 61 voted in favor of 400Gb Ethernet as the next target and one voted to decide later, making Terabit Ethernet effectively a lost cause – at least for now. ®
****************************************
The above information is edited by 10GTEK.
10GTEK TRANSCEIVERS CO., LTD (Hereinafter refered to as 10GTEK) is specialized in developing and manufacturing Fiber Optical Transceivers and High Performance Cables which are wildly applied in Datacom, Telecom and CATV, providing customers with top quality and cost effective products. Our High Speed Cables cover Passive SFP+ Cable, Active SFP+ Cable, QSFP+ cables, MiniSAS (SFF-8088) Cables, CX4 Cables, Harness cables, Breakout Cables, Patchcords. We also manufacture Fiber Optic Transceivers like 10G XFP, 10G SFP+, SFP DWDM/ CWDM, GBIC, etc. The prompt response and excellent customer support contribute to clients‘ full satisfaction.Today, 10GTEK has been growing fast in the optical field for its unique and competitve excellence which has got a high attention from datacom and telecom.
This article reader also like: Aussie Provider Picks Broacde Switches