LeCroy Updates 10/40/100G Test

Week News Abstract For Fiber Series in 10GTEK

The abstract is mainly about the optical communication related products,including: SFP,QSFP,FTTH,GPON,EPON,SFPPLC,PTN,ODN,Sfp Transceiver,Optic Transceiver,Optical module,Optical devices,optical communications,Optical transceiver module,Etc.

 

Transceiver Market to Hit $3.3B

BOSTON -- Market research firm Infonetics Research released excerpts from its recent 10G/40G/100G Optical Transceivers Market Size and Forecast, which tracks 10 Gigabit, 40 Gigabit, and nascent 100 Gigabit optical transceivers and transponders sold into the optical transport, enterprise, and carrier routing and switching markets.ANALYST NOTE"2012 will be a pivotal year for 100G design activity, with many new equipment vendors fielding production equipment," expects Andrew Schmitt, principal analyst for optical at Infonetics Research. "This will drive volume in the component world in 2013 as carriers reboot their optical networks and roll out all-coherent networks. In the meantime, 10G WDM interface growth continues with the tunable XFP playing the lead role, while 10G SFP+ volumes in the data center explode."

----------------------------------------------------

Optelian Adds Multiservice Card

MARIETTA, Ga. -- Optical networking specialist Optelian is pleased to announce the addition of the FLX-1610 multi-service networking card to the LightGAIN portfolio. It provides high-density, multiprotocol aggregation and flexible deployment options that improve network efficiency and offers unprecedented service delivery flexibility to LightGAIN networks.The high-density FLX-1610 card has 14 SFP ports aggregating any mix of client services, and two XFP line ports to handle both linear and ring topologies. Any combination of protected or unprotected Ethernet, SONET/SDH, storage, and video client services (155 Mb/s to 4.25 Gb/s) can be supported up to a cumulative bandwidth of 10 Gb/s per XFP port. The line interface is OC-192 with optional G.709 OTU2 encapsulation and tri-FEC for enhanced reach. The FLX-1610’s deployment options include 10-Gb/s and 20-Gb/s point-to-point muxponder modes, as well as a distributed add/drop networking mode where services can be cross-connected between any FLX-1610 within a linear ADM chain or UPSR-protected 10G ring.

----------------------------------------------------

LeCroy Updates 10/40/100G Test

CHESTNUT RIDGE, N.Y. -- LeCroy Corporation introduces software and hardware test solutions for 10GBase-R and 40/100GBase-R4 Ethernet. The full lineup includes the LabMaster 10 Zi real-time oscilloscopes with 4 channels at up to 36 GHz bandwidth (expandable to 80 channels), the industry’s first 10 Gb/s optical-to-electrical (O/E) converter for use with real-time oscilloscopes, automated compliance software packages for SFI/SFP+ and 10GBase-KR, new SDAIII-CompleteLinQ multi-lane serial data and crosstalk analysis toolsets, and the SierraNet M408 protocol test system. These tools provide the most complete compliance, debug and analysis capability from single-lane electrical Ethernet through multi-lane optical signaling.Early 10 Gb/s electrical and optical development was validated using sampling oscilloscopes. However, sampling oscilloscopes lack the ability to acquire contiguous data, and are unable to perform the necessary pattern-based random and deterministic jitter decomposition. As 10 Gb/s speeds become more widely deployed, and as real-time oscilloscopes have become available with equal or greater bandwidth than sampling oscilloscopes, engineers have come to prefer a real-time oscilloscope for 10 Gb/s system validation and debug. LeCroy’s 10 Zi oscilloscopes provide four channels from 25 to 36 GHz bandwidth, with modular expandability up to 80 channels using ChannelSyncTM architecture. This makes them ideal for four (or more) lane acquisition and analysis using direct cabled inputs four differential signals common in 40GBASE systems. Furthermore, as users migrate to 28 Gb/s speeds, the LabMaster 10 Zi acquisition modules can be upgraded to as much as 65 GHz of bandwidth.LeCroy’s new OE695G wide-band optical to electrical (O-E) convertor is the world’s first such device to be compatible with a real-time oscilloscope, making it ideal for system integrators who utilize both electrical and optical signals in the same platform. Previous O-E solutions were dedicated hardware modules for sampling scope mainframes only, limiting their utility for jitter measurement and analysis on 10 Gb/s signals. The OE695G utilizes a built-in software reference receiver to support 10 Gb/s Ethernet standards through 10 GbE FEC (11.095 Gb/s), as well as supporting a variety of other speeds for common Fibre Channel and ITU telecom standards, or custom settings up to 12.5 Gb/s. The OE695G is usable with both single-mode or multi-mode fiber across a broad wavelength range from 750 to 1650nm.

****************************************

The above information is edited by 10GTEK.

10GTEK TRANSCEIVERS CO., LTD (Hereinafter refered to as 10GTEK) is specialized in developing and manufacturing Fiber Optical Transceivers and High Performance Cables which are wildly applied in Datacom, Telecom and CATV, providing customers with top quality and cost effective products. Our High Speed Cables cover Passive SFP+ Cable, Active SFP+ Cable, QSFP+ cables, MiniSAS (SFF-8088) Cables, CX4 Cables, Harness cables, Breakout Cables, Patchcords. We also manufacture Fiber Optic Transceivers like 10G XFP, 10G SFP+, SFP DWDM/ CWDM, GBIC, etc. The prompt response and excellent customer support contribute to clients‘ full satisfaction.Today, 10GTEK has been growing fast in the optical field for its unique and competitve excellence which has got a high attention from datacom and telecom.